| Gas Clean Filter Moisture | CP17971 | Agilent-Mỹ |
| Gas Clean Filter Hydrocarbon | CP17972 | Agilent-Mỹ |
| Gas Clean Filter Oxygen | CP17970 | Agilent-Mỹ |
| Trap, Big H2O, 1/8in | BMT-2 | Agilent-Mỹ |
| Heater Assy f/Heated Valve, 50w, Unity 2 (Bộ gia nhiệt / valve được gia nhiệt) | G3565-67006 | Agilent-Mỹ |
| Thermocouple, Type K 0.5mm x 150mm (cặp nhiệt điện) | G3565-60006 | Agilent-Mỹ |
| Nicat, HTR/Sensor | G1580-61160 | Agilent-Mỹ |
| 4Ft 1/8 2mm MolSieve 13X 45/60 UM | G3591-81012 | Agilent- Mỹ |
| 8Ft 1/8 2mm HayeSep Q 80/100 SS | G3591-80047 | Agilent- Mỹ |
0
1 Trả lời
0
Câu trả lời hay nhất
| 002000 | Syringe 10 µL fixed needle with 5 cm 0.47 mm OD bevel tipped needle, 1PK |
| 002981 | Syringe with Fixed Needle, 10 uL, 50 mm L, 23 G, 1PK |
| 00301-15100 | Oil for Vacuum Pump, 1 L, 00301-15101. |
| 0100-0900 | Union, zero-dead-volume, SS, with fittings |
| 0100-1850 | Stator Head for Agilent 1100 Autosampler, 0101-0921 valve |
| 0100-1853 | Rotor seal, Vespel, 400 bar, 2 grooves |
| 0101-0113 | Soap Film Flowmeter 100ml 0101-0113 |
| 01018-22707 | PTFE frits, 5/pk |
| 013.01.010 | Glass Volumetric Flask, Class A, Clear, 10 ml Capacity, NS 10/19 Neck, Pack of 2 |
| 013.01.101 | Glass volumetric Flask, Class A , Blue Scale - 100 ml - NS 14/23, Pack of 2 |
| 015.01.010 | Glass Measuring Cylinder, Class A, Tall Form, 10 ml Capacity, Pack of 2 |
| 015.01.025 | Glass Measuring Cylinder, Class A, Tall Form, 25 ml Capacity, Pack of 2 |
| 015.01.050 | ISOLAB Measuring Cylinder 50ml Tall Form 015.01.050 |
| 015.01.100 | ISOLAB Measuring Cylinder 100ml Tall Form 015.01.100 |
| 015.01.500 | ISOLAB Measuring Cylinder 500ml Tall Form 015.01.500 |
| 015.01.901 | ISOLAB Measuring Cylinder 1000ml Tall Form 015.01.901 |
| 017-30163-02 | Oil Rotary Pump, Ultragrade 19, 4L (RV3 & 5) |
| 018.001.050 | Volumetric flask, DIN-A, 10 ml, ST 7/16, with PE-stopper, Pack of 2 |
| 021.01.010 | Isolab Graduated Pipettes 10ml Class AS 360mm 021.01.010 |
| 021.01.020 | Isolab Graduated Pipettes 10ml Class AS 450mm 021.01.020 |
| 021.05.001 | Isolab Volumetric Pipettes 1ml Class AS 310mm 021.05.001 |
| 021.05.002 | Isolab Volumetric Pipettes 2ml Class AS 330mm 021.05.002 |
| 021.05.020 | Isolab Volumetric Pipettes 20ml Class AS 510mm 021.05.020 |
| 025348 | Union Turbo V Source Peek Union, 1pk |
| 027471 | Fitting 1/16 INCH SHORT HEX PEEK, 1pk |
| 030.02.102 | Glass 3.3 Round Bottom Flask 100ml, Pack of 1 |
| 030.02.251 | Isolab Glass Round Flask NS 24/29 Socket 250ml |
| 033.03.400 | Borosilicate Glass3.3 Spiral Condenser+Glass Side Arm 400mm, 033.03.400 |
| 036-11203-84 | O-Ring 4D P5X5, 5pk |
| 037-61018-00 | Gas hose clamp, Wire band 1pk |
| 040.01.100 | ISOLAB Glass Filter Flask with Side Arm 100ml 040.01.100 |
| 040.01.500 | ISOLAB Glass Filter Flask with Side Arm 500ml 040.01.500 |
| 05988-20066 | Nut fitting, Column nuts. for 5973 |
| 062-65055-05 | Deuterium Lamp For UV-Vis Spectrophotometers |
| 0711-0092 | RP-18 Brownlee Columns New Guard RP-18 15x3mm, Part No. 07110092 |
| 07150001 | Brownlee NewGuard Cartridge Holder |
| 072627 | Graphite Ferrule, Compatible with PerkinElmer 1/16" Fittings, 0.5 mm Hole, 3.7 mm L; 10/Pk |
| 07-6048 | Cell Culture Plate 07-6048 Ps 0.5Ml Vol (Pack Of 50) |
| 080-1064 | 080-1064, Hitachi, SYRINGE(500ul) |
| 080-1591 | SYRINGE 080-1591, Hitachi, L-7200 0.1 ML |
| 08-4437 | NM30LA service kit Peak Scientific, 1pk |
| 08-4723 | NG250-4000 Annual Maintenance Kit |
| 088666-U | ADRS 600 4mm Anion Dynamically Regenerated Suppressor, 1PK |
| 088667 | ADRS 600 2mm Anion Dynamically Regenerated Suppressor, Replaces # 082542/2021 |
| 0905-1175 | Seal wash, PTFE, 1 /pk |
| 09902131 | O-RING 1-7/16 Od X 1/8 Wide 09902131 |
| 09902223 | VITON O-RING 0.799 ID X 0.103 WD. PE-09902223 |
| 1000005 | O-Ring 20.3 mm I.D., Qty. 1 (09902045) |
| 1000026 | Stainless Steel Tubing, 1/16" OD x 0.17mm ID x 1m |
| 1000027 | Tubing, PTFE, 1/16" OD x 0.25mm x 1m, ea. |
| 1000028 | Tubing 10 FEET, PEEK, 1/16'' OD, 0,007'' ID, gray, 10 F -pc/pak |
| 100326 | D2 UV lamp assembly for the 155/156 |
| 101C100F11BC099 | Procon Pump Series 1 |
| 10224 | Cột sắc ký khí Restek 10224, GC Capillary Column Rtx-5 30m, 0.32mm ID, 0.25µm, 1pk |
| 10-405-052 | Deuterium Lamp (D2) for Analytik Jena AAS |
| 10424 | Rtx-35 30m, 0.32mm ID, 0.25µm, 1pk |
| 10-9815 | Ống ly tâm nhựa 15ml, cái |
| 10-9850 | Ống ly tâm nhựa 50ml, cái |
| 111A100F11AA | Procon Pump Series 1 |
| 12024 | Rtx-1701 Cap. Column 30m 0.32mm ID 0.25um |
| 12108603 | Bond Elut Plexa PCX cartridge, 60 mg, 3 mL, 50/pk |
| 122-5532UI | DB-5ms Ultra Inert GC Column, 30 m, 0.25 mm, 0.25 µm, 7 inch cage. |
| 122-7032 | DB-WAX GC Column, 30 m, 0.25 mm, 0.25 µm, 7 inch cage |
| 13085-U | Glass Packed GC Column phase 3% OV-17, 1PK |
| 13906--47----ACN | Màng lọc Sartorius Membrane Filters Cellulose Nitrate 13906--47----ACN, hộp 100 cái |
| 18593B | Agilent HP 7673 7673B 5890 6890 GC ALS Autosampler Injector 18593B |
| 19231-60680 | Ignitor Glow Plug Assembly. Package: 1 PC |
| 19244-80560 | Jet 19244-80560, for Agilent 5890/6850/6890 GCs. 0.011-Inch ID Tip. Length: 61.5 mm |
| 1-Q-10-1 | Cuvette thạch anh 10mm , (HxWxD mm): 45 x 12,5 x 12,5 mm, 1PK |
| 200 594 | SEPTA 12MM RED T/S 0.075 FOR13-425 CAP, 100 per pack |
| 201-35584-00 | SEPTA SILICONE RUBBER 350C MAX (20/PK) |
| 20192 | Tubing Cutter, 20192 - Tool 1/16 Restek |
| 212164404 | Duran Erlenmeyer Flasks DURAN NAR Neck 500ml 212164404 |
| 220-91563-03 | Stainless Steel Tubing, 1/16" OD x 0.125 mm ID x 30 cm |
| 225-14948-91 | ESI CAPILLARY PIPE ASSEMBLY, LCMS-2020, LCMS-8030/8040/8045/8050. |
| 226-50316 | Tubing Connection, 1/8” OD tubing, Blue Polypropylene fitting, Yellow Tefzel ferrule. |
| 228-18872-91 | Line filter, LPM-600, 1pk |
| 228-21217-91 | Rotor-Seal SIL-10A, AXL, 1PK |
| 228-32744-00 | PEEK Frit for Inline Filter, LC-10Avp, LC-20Ai |
| 228-34016-02 | Deuterium Lamp 228-34016-02 - Shimadzu |
| 228-34700-39 | Shimadzu FCV-10ALvp Low Pressure Gradient Unit 228-34700-39 |
| 228-35146-00 | SEAL 42455 |
| 228-35359-36 | Shimadzu DGU-14A Degasser HPLC Unit 228-35359-36 |
| 228-37401-91 | Deuterium Lamp 228-37401-91 - Shimadzu |
| 228-39000-38 | Shimadzu LC-10ADVP Micro-Plunger Pump, 228-39000-38 |
| 228-39120 | SPACER VP |
| 228-39751-91 | 500 µL Sample Loop, SIL-10ADvp |
| 228-40002-38 | Shimadzu CTO-10A VP Column Oven HPLC Liquid Chromatograph P/n: 228-40002-38 |
| 228-41024-93 | Pt Coated Needle, SIL-20A/C, SIL-20A/CXR |
| 228-45012-38 | Shimadzu CBM 20A HPLC Unit 228-45012-38 |
| 228-45408-91 | HPV Stator, PEEK, SIL-20A/AC, High Pressure Valve |
| 228-46609-93 | Stainless Steel Tubing, 1/16" OD x 0.3mm ID x 1m |
| 228-46609-94 | Stainless Steel Tubing, 1/16" OD x 0.17mm ID x 1m |
| 228-48464-92 | 228-48826-92, Pre-cut Stainless Steel Tubing, 0.1mm ID x 600 mm, SIL-20A/ACHT |
| 228-55626-00 | D2 Lamp, i-Series, Deuterium lamp for i-Series LC-2030 and LC-2040 UV detector. |
| 229.202.07 | Beakers, Low Form with Spout, DIN/ISO 250ML |
| 229.202.10 | Beakers, Low Form with Spout, DIN/ISO 1000ML |
| 229.202.11 | Beakers, Low Form with Spout, DIN/ISO 2000ML |
| 25324 | PEEK Fingertight Fittings, Blue, Flat, 1/16, 10-32, 5000psi, 10-pk |
| 25348 | Union Turbo V Source Peek, 1pk |
| 25812 | Guard Column Holder for 4.0 x 10mm Roc Guard Cartridges, ea. |
| 2641058 | ILS, 5,0ml Syringe H- TLL ILS 2641058, 5,0ml Syringe H |
| 27471 | Nuts Self Tightening Column Sciex Turbo V Source fitting 027471 , 1PK |
| 27751 | PEEK Tubing, 1/16" OD, Blue Stripe, 0.010" ID, 3 m, ea. |
| 27849 | PEEK Finger-Tight Fitting SDP For Tubing with 1/16 in. OD, 1pk |
| 2981 | Syringes for TriPlus. 10µL Syringe 10F-C/T-5/0.63C |
| 2J1-1500 | DEUTERIUM LAMP U1900/2900 |
| 3010322 | Syringe Luer Lock, GT, Plunger Tip PTFE, Single, 1PK |
| 3010665 | Syringe Luer Lock, GT, Plunger Tip Modified PTFE, Single, 1PK |
| 301-220-HSP | Needle assembly, vial probe, SS, deactivated, for Agilent 7694 headspace sampler |
| 30268906 | OHAUS SPX222 Maximum Capacity, 220 g Readability, 0.01 g Pan Size, 4.7 in (120 mm) |
| 3150-0944 | Solvent inlet filter, glass fiber, 40 µm, Film Pore Size: 40 µm, Non-sterile |
| 32702748954 | Kẹp giữ bình cầu 18# Stainless Steel Spherical Interface Clip, 1pk |
| 34120 | Kimwipes 4-2/5 in. x 8-2/5 in. 1-Ply |
| 407-152.314 | Z-graphite tube with PIN-platform, long Pack of 1ea |
| 407-152.315 | Z-standard graphite tube Pack of 1 EA |
| 407-403.147 | O-ring 8,5 x 1,8 for nebulizer |
| 407-A81.025 | Graphite tube with PIN-platform, coated, 1PK |
| 4092-307 | Sample Cup, 2mL, Polypropylene (PP), Conical, 1000/pk |
| 410000274 | Litetouch Nut Fitting 0.062 OD, 10-32 PEEK Natural 4/Pack |
| 420400-1 | Whatman 420400-1 Swin-Lok Plastic Filter Holder, 47 mm, 1 per pack |
| 480-450.001 | Al HCL Aluminum (Al) |
| 480-450.003 | As HCL Arsenic (As) |
| 480-450.006 | Bi HCL Bismuth (Bi) |
| 480-450.008 | Cd HCL Cadmium (Cd) |
| 480-450.014 | Cu HCL Copper (Cu) |
| 480-450.021 | Au HCL Gold (Au) |
| 480-450.026 | Fe HCL Iron (Fe) |
| 480-450.028 | Pb HCL Lead (Pb) |
| 480-450.031 | Mg HCL Magnesium (Mg) |
| 480-450.032 | Mn HCL Manganese (Mn) |
| 480-450.033 | Hg HCL Mercury (Hg) |
| 480-450.049 | Se HCL Selenium (Se) |
| 480-450.052 | Na HCL Sodium (Na) |
| 480-450.067 | Zn HCL Zinc (Zn) |
| 4910012700 | PAD ADHESIVE WINDOW O 32.5. |
| 4910012800 | PAD ADHESIVE WINDOW 36X25 |
| 5-0000-080-00 | VACUFLEX PU 400 E - LW 80, P/N: 5-0000-080-00 |
| 5001-3707 | Seal, gold, Pump outlet Agilent 5001-3707 |
| 5001-3708 | Gold Seal for Inlet Valve - 5001-3708 |
| 5020-08500 | Guard Column E Holder, 10mm, 1pc, 5020-08500 |
| 5042-6461 | Tubing, PEEK, 1.6 mm od, 0.13 mm id, 5 m |
| 5042-6462 | Agilent, Tubing, PEEK, 1.6 mm od, 0.18 mm id, 5 m |
| 5042-6463 | Tubing, PEEK, 1.6 mm od, 0.25 mm id, 5 m |
| 5061-5869 | Washers, 0.375 inch od, 12/pk |
| 5062-2485 | Outlet Caps 4/Pack |
| 5062-3512 | Ferrule, 0.8 mm id, 15% graphite/85% Vespel, 0.45 to 0.53 mm column, short, 10/pk |
| 5062-3538 | Ferrule, 0.8 mm id, preconditioned 15% graphite/85% Vespel, 0.53 mm column, long |
| 5062-8562 | AIV Cartridge (400bar), active inlet valve, 400 bar, PK |
| 5063-6586 | Sapphire Piston, 1PK |
| 5067-4659 | Capillary stainless steel 0.12 x 340 mm S/S ps/ns |
| 5080-8773 | Ferrule, graphite, 1 mm id, for 0.53 mm capillary columns, 10/pk |
| 5080-8853 | Ferrules, graphite, short, 0,5mm id, for 0, 1 to 0, 32mm columns, 10 pcs. |
| 517755-023 | Loop Rheodyne 50ul Sample Loops, SS for 7725i |
| 5181-3354 | Syringe 5181-3354, 10µl tapered, fixed needle, PTFE-tipped plunger, 23-26s/42/cone |
| 5182-0551 | Vial 13mm Clear Glass Screw Thread Vials, 4ml wash/waste vial 25/PK |
| 5182-0714 | Vial, screw top, clear, certified, 2 mL, 100/pk. Vial size: 12 x 32 mm (12 mm cap) |
| 5183-2085 | Vial insert, 250 µL, pulled point glass, 100/pk Insert size: 5.6 x 31 mm |
| 5188-5347-1 | OFN NCI Checkout standard 100 fg/uL/1pk |
| 5188-5365 | O-ring, non-stick fluorocarbon, 10/pk. |
| 5188-5366 | O-ring, non-stick, for Agilent Flip Top Inlet |
| 5190-1488 | Syringe 10ul FN 26 G Sflex Bevel (Each of 1) |
| 5190-2292 | Liner, UI,splitless,single taper, no wool, 1pk |
| 5190-6194 | Self-Tightening Column Nut, 1pk |
| 5190-9067 | Cap, blue, screw, bonded preslit PTFE/silicone septa, 2 mL, 1000PK |
| 5302020 | Lid 5302020 DAP-60K - Berghof |
| 58699 | Tubing, PTFE (FEP), 0.063in ID x 0.125in OD, 10' Lgth, 1/8inch |
| 5-9054 | SupelGuard LC-18 Kit, 5um, Supelcosil 2cm x 4.6mm Cartrigde |
| 5982-5156 | Dispersive SPE 15ml, Fatty Samples, EN, 9P, 50pk |
| 5982-5650 | QuEChERS Extract Tubes, EN Method, 9P, 50pk |
| 6000-211-1 | Fittings, 1/16'', SS, LG, 1 pc/PAK |
| 60180-825 | Cartridge Filter, Indicating Triple (H2O, O2, HCs), He Preconditioned for GCMS |
| 6040-0809 | Diffusion pump fluid, 18.5 mL, 2 required for Agilent 5975 and 5973 Series |
| 6040-0834 | Foreline Rough Pump Oil, 1 liter - 6040-0834 |
| 6044.2310 | Outlet check valve unit, VH-P1 |
| 6310001200 | Graphite tubes, partitioned, 10/pk, AA |
| 633-1062 | SPACER FOR FLOWCELL CONNECTION |
| 638-1099 | Ferrule (SUS 316) 1/16 inch for L-2100 Pump |
| 638-1423 | Flow Path Filter, 1PK |
| 64261 | OSRAM 64261 HLX Halogen lamps 12V, 30W |
| 655-1080-B | Seal (black), 1pk for Hitachi Piston and Drain Valve |
| 655-1080-G | Seal (Gold), 1pk for Hitachi Piston and Drain Valve |
| 675 1030BT8 | SAMPLER TIPS 19 mm DIAMETER for use with 19mm diameter PowderThief Bodies |
| 6910009800 | O-ring 3/16 inch id x 5/16 inch od x 1/16 inch thick, nitrile rubber |
| 6910012100 | O-ring, nitrile, 1 inch id, 1-3/16 inch od, 3/32 inch thick |
| 700001461 | 6070117 Ferrule, Graphite/Vespel, 1/16 in |
| 700006543 | Seal, P-200A, GFPM, HVY-Med Spring |
| 70045 | MXT Guard Column, 0.53 mm x 0.74 ± 0.025 mm, 5 m |
| 720060 | Pipette 1-Channel 100-1000ul Proline Mechanical |
| 725060 | Pipette 20-200 µL Biohit mLine Single Channel Manual |
| 725090 | Pipette, 1-ch, 1-10 ml Sartorius 725090 mLINE mechanical |
| 770.51791 | LS/B-H TORNADO Hydrogen CYLINDER PRESSURE REGULATOR |
| 7755-023 | 50µL Stainless Steel Sample Loop for Model 7725 Rheodyne Injectors |
| 79835-87638 | Tubing, 320mm, 0.25mm id - AA HPLC 79835-87638 Agilent SS |
| 8005-0414 | Syringe for Waters, 10 mL, Luer lock, PTFE-tip plunger, (no needle) |
| 80366 | Syringes, 10 uL, Cemented-Needle, 6/pk |
| 80565 | 50 µL Microliter Syringe Model 705 N, Cemented Needle, 22s gauge, 2 in, point style 3 |
| 81003-0 | Syringe for use with the Setavap 2 Vapour Pressure Tester (81000-2) |
| 810-1004 | Inlet Check Valve Assembly - 810-1004 for L-7100, L-7110 & L-2130, ANO-0836 |
| 810-1005 | Outlet Check Valve Assembly, OEM Part ANO-0837 |
| 810-1008 | PLUNGER GUIDE |
| 810-1128 | Drain Valve Packing |
| 810-1337 | Solvent Filter, 1PK |
| 810-1344 | Packing B (M27034) for L7100 - 810-1344 (810-1364), 1pk |
| 810-1345 | Packing A, 1pk |
| 810-1433 | Packing A (M27034) for L7100 - 810-1433 |
| 810-3927 | Flow Cell 12ul for L-7485 - 810-3927, 1pk |
| 811001-00116 | Solvent Kit (Tubing with G45 bottle cap and inline nut) |
| 81320 | Syringe Model 1001 TLL, PTFE Luer Lock, Needle Sold Separately. Part/REF #s: 81320 |
| 820950-925 | Guard XDB-C18, 80Å, 4.6 x 12.5 mm, 5 µm, 400 bar, guard cartridge (ZGC), 4/pk. |
| 820999-901 | Guard fittings kit (ZGC) Agilent 820999-901. High performance ZORBAX |
| 82335-60001 | HP-IB Interface Card 82335-80001 |
| 823750-911 | Guard InfinityLab Poroshell 120 EC-C18, 3.0 mm, 2.7 µm, UHPLC , 3/pk |
| 855-5034 | CLEANING SEAL |
| 855-5694 | PIPE (M1-C) |
| 855-5696 | PIPE (C-VIS) |
| 8619-0154 | Burkle - 8619-0154 - stop-it hose clamp, Easy-Click, 15 mm, yellow |
| 885-1200 | Hitachi Tungsten Lamp |
| 885-1505 | Seal, 4-Way Hitachi LPG Joint |
| 885-1884 | Washing Mechanism Seal - 885-1884 |
| 885-2920 | Seal for Drain Valve 885-2920 |
| 890-1095 | Leak Sensor Assembly for L-2420, 1PK |
| 890-2005 | HITACHI FLOW CELL ASSY, COMPLETED SET |
| 890-2123 | GRATING |
| 890-2527 | Halogen Tungsten Lamp (20W) for DAD Detectors - 890-2527 |
| 890-3183 | Injection Port Seal for L-2200 Autosampler |
| 890-3228 | Syringe 890-3228, Hitachi, L-2200 0.1 ML SYRINGE, |
| 890-3234 | Syringe Valve Seal for L-2200 |
| 890-3237 | Injection Valve Stator for L-2200 Autosampler |
| 890-3243 | Injection Valve Rotor Seal for L-2200 Autosampler |
| 890-6003 | LPP-150-24 POWER SUPPLY ASSY |
| 890-6502 | Solenoid Valve Low-pressure Gradient for L-2100, L-2130 - 890-6502 |
| 890-6727 | PhotoInterrupter SV (890-6727) |
| 891-1213 | Plunger Seal - 891-1213 |
| 892-0322 | 2-Position, 6-Port valve for 5310, kit |
| 892-6507 | SOLENOID VALVE A ASSY |
| 892-6789 | MOVABLE CABLE ASSY, 1pk |
| 893-0810 | Seal for Injection port, 1pk |
| 893-0812 | Seal AN0-5201,Injection valve seal, PEEK, 400 bar,1PK |
| 893-0815 | Syringe, 175 µl for Autosampler Chromaster CM5210 und CM5260 |
| 893-0816 | Needle - 893-0816 |
| 893-4755 | D2-Lamp Longlife for DAD CM-5430, part# 893-4755 |
| 9000-1471 | Systec ZHCR Vacuum Pump, Vacuum Degasser Pump P/N 9000-1471 |
| 9301-0713 | Syringe, 10 µL, fixed needle, 23/42/cone |
| 9301-0891 | Syringe, 5 µL fixed needle, 26s/42/cone |
| 942339000000 | 942339395031 CUV NORM ELECTROGRAPHITBOX 10 CUVETTES |
| 942339395031 | Graphite Cuvettes Ridget and Uncoated, 10pk |
| 942339395031-1 | Graphite Cuvettes Ridget and Uncoated, 1pk |
| 942342000000 | 942342030004 Deuterium (D2) lamp for Thermo/Unicam S4, iCE 3000 Series, iCE M-Series |
| 942342030004 | Deuterium (D2) lamp for Thermo/Unicam S4 |
| 953350210 | HPLC Column Roc C8 10 x 4.0mm,3pk |
| 9533575 | Roc C8 5um, 4.6 x 250mm |
| 96419 | Alltech Silica All-Guard Cartridges and hardware 7,5x4,6mm 3pk, P/N: 96419 |
| 9910024800 | Tubing, std, 3m, Agilent 9910024800 - Hi solids Capillary |
| 9910031200 | Electrode extractor tool for GTA 96/97/100/110/120 |
| 9910053900 | Burner cleaner strips, pk.100., Agilent 9910053900, Mark 7 Spray Chamber |
| A2010MG | Polaris 180Å C8, 4.6 mm, 5 µm, MetaGuard, 1/pk |
| A6000250X046 | Pursuit XRs 100Å C18, 4.6 x 250 mm, 5 µm HPLC column |
| ACL-0024 | Cr HCL Lamp Chromium (Cr), Part# ACL-0024 |
| ACL-0025 | Mn HCL, Hollow-Cathode Lamp for Manganese (Mn), Part# ACL-0025 |
| ACL-0029 | Cu HCL Lamp, Copper (Cu), Part# ACL-0029 |
| ACL-0033 | As HCL Lamp, Arsenic (As), Part# ACL-0033 |
| ACL-0042 | Mo HCL Lamp, Molybdenum (Mo), Part# ACL-0042 |
| ACL-0048 | Cd HCL Lamp, Cadmium (Cd), Part# ACL-0048 |
| ACL-0051 | Sb HCL Lamp, Antimony (Sb), Part# ACL-0051 |
| ACL-1024 | Cr HCL Lamp, Chromium (Cr), Part# ACL-1024 |
| ACL-1048 | Cd HCL Lamp, Cadmium (Cd), Part# ACL-1048 |
| ACL-1051 | Sb HCL Lamp, Antimony (Sb), Part# ACL-1051 |
| ANO-0835 | Check Valve Cartridge, 2/pk |
| Aug-23 | Bộ kít thay thế định kỳ cho máy sinh khí của Peak Scientific, 08-4723 NG250-4000 Annual Maintenance Kit |
| Aug-35 | Bộ kít 08-4437, thay thế định kỳ cho máy sinh khí ni tơ NM30LA của hãng Peak Scientific, 1pk |
| B0080832 | Holmium Oxide Glass Filter |
| B-202-1 | Brass Nut for 1/8 in. Swagelok Tube Fitting, B-202-1 |
| B2205411 | Cell Holder holds up to eight standard 10 mm cells LAMBDA Spectrometers |
| C0904-A4039 | ChraSil A100 C18 Guard cartrigde 4.0um 10 x 3mm, 3pk |
| C1445-B5036 | ChraSil B100 NH2, Guard 10 x 4.6 mm, 5.0um, 4pk |
| C1505-B5032 | ChraSil B100 C18, 150 x 4.6 mm, 5.0um, C1505-B5032 |
| C1505-B5034 | ChraSil B100 C18, 250 x 4.6 mm, 5.0um, C1505-B5034 |
| C1515-B5032 | ChraSil B100 C8, 150 x 4.6 mm, 5.0um |
| C1515-B5036 | ChraSil B100 C8, Guard 10 x 4.6 mm, 5.0um, 4pk |
| C1547-B5034 | ChraSil B100 Phenyl, 250 x 4.6 mm, 5.0 um |
| C1551-B5034 | ChraSil B100 NH2, 250 x 4.6 mm, 5.0um, 1pk |
| C20087-115344 | Insert 250ul 29 x 5.7mm for vial 2ml, 100pk |
| C201352380 | Bọt biển giữ ẩm: 7,6cm x 4cm, 10pk (Cellulose Sponges) |
| C22087-245443 | Small Neck (GL-38) Bottle Cap Assembly 1/8", W/ tubing kit |
| C22087-245444 | ChraSep, Small Neck (GL-38) Bottle Cap Assembly 1/8", Cap only |
| C22087-245445 | GL-45 Bottle Cap Assembly 1/8", Cap only |
| C22087-245446 | PTFE Tubing Adapted to Female Luer Lock Fitting, with 28" of 1/8" Tubing, Fitting Kit |
| C4015-45 | Septa Teflon/SiliconeI CONE SOFT DURFOR 13-425 Cap, 100/PAK |
| CG-1158-12 | GL-45 Cap Assembly, Red, 1/8" |
| CG-1164-02 | Tubing, PTFE (FEP), 0.063in ID x 0.125in OD, 10' Lgth |
| CG-1164-N-01 | Nut, Flangeless, 1/16", Yellow, Tefzel |
| CP17972 | Gas Clean Filter Charcoal |
| D3-C1 | AA HCL Lamp Cover box draft |
| D3-C2 | D2 Hitachi Lamp Cover box draft |
| DCL-2213 | Deuterium Lamp, Part# DCL-2213 |
| DS-2CE76U1T-ITMF | HikVision Camera quan sát DS-2CE76U1T-ITMF |
| ENF-260C/FE | UV LAMP 230V 6W 2171535 |
| F-120BLK | One-Piece Fingertight Male Nut Black 10-32 Coned, for 1/16" OD Tubing |
| G1099-80039 | Oil Mist Filter, 3/8 BSP Male Threads Exhaust Oil Mist Filter for Edwards and Pfeifferr round pumps, 1pk |
| G1205-60550 | Collector Assembly PN: G1205-60550 for Agilent/HP 5890 GC |
| G1312-60067 | Outlet Ball Valve For 1100/1200/1220/1260 |
| G1312-67305 | Connecting capillary, SS, 0.17mm id, 60cm length, used as outlet capillary or pump to injector, ea. |
| G1314-60100 | Lamp, deuterium, long-life, Agilent G1314A/B/C VWD 1120 and 1220 Infinity LC |
| G1314-60100-DS | Lamp, deuterium, long-life, Agilent G1314A/B/C VWD 1120 and 1220 Infinity LC |
| G1316-87316 | Capillary stainless steel 0.12 x 170 mm S/S ns/ns |
| G1530-61100 | Tubing 1/8in OD X 250cm Cu Tubing Coil |
| G1531-80620 | Jet, optimized, 0.018 inch id tip, for capillary columns |
| G20163-14998 | O-ring alternative to Shimadzu part# 036-10201-00 O-ring |
| G20163-15244 | SOLVENT FILTER, MERCK Art.Nr. 27047 |
| G20163-C10394 | ChraPart #G20163-C10394, alternative to part# 655-1080, Pump Seal, Black, Comparable to OEM # 655-1080 |
| G20163-C10493 | ChraPart #G20163-C10493, alternative to part# ANO-0835, Check Valve Cartridge, 2/pk, Comparable to OEM # ANO-0835 |
| G20163-C10547 | ChraPart #G20163-C10547, alternative to part# 655-1080, Pump Seal, Gold, Comparable to OEM # 655-1080 |
| G20163-C13984 | ChraPart #G20163-C13984, alternative to part# 2140-0820, Long Life Deuterium Lamp, RFID (2000 hr), Comparable to OEM # 2140-0820 |
| G20163-CA106 | Rotor Seal, Comparable to OEM # 228-21217-91 |
| G3182-61580 | ULTIMATE UNION FOR GC G3182-61580 Ultimate Union Kit, deactivated |
| G4226-43800 | Seal Insert Tool, Agilent G4226-43800, 1PK |
| G80222-P0007 | ChraSep G80222-P0007, Sterile White PTFE sampling template with press 'hold' tab 5cm x 5cm, 10/pk |
| GB-100R | Glass Fiber Filters, Advantec, GB-100R, 110mm, 100/Pk |
| HCL-LABEL | JENA HCL LABEL KIT COLOR PRINTED, |
| JR-0611-TI05-3 | Sure-Guard inline filter, titan, 1/16 inch, 0.5 µm, 3/pac |
| JR-797 | Tool, Clean-Cut Tubing Cutter |
| JR-T-625-20-M3 | Tubing, SS, 1/16 x 0.50 mm ID, 3 m/PAK |
| JR-ZU1XCS6 | Union SS Bore 0.15mm 1/16in ZU1XCS6 |
| L233-19NB | K HCL, Hamamatsu L233-19NB Hollow Cathode Lamp Element: K |
| L233-80NU | Hg HCL, Hamamatsu L233-80NU Hollow Cathode Lamp Element: Hg |
| LH-780136 | Sartorius Biohit Tip 10ml, 250pcs |
| MS-0210-0003 | 13mm PP Membrane Filter Holder |
| N9302783 | O-Ring, Viton for Glass Liner (pkg. 10) |
| P06150338 | Nitrogen generator System GML32NM |
| P0620-00219 | Cork Stoppers for L-K Centrifuge Tubes Model J-055D Package of 6 |
| P19207-C00017 | Luer-Slip Syringe, 10ml Plastic Disposable For HPLC Solvent, 10PK |
| P19207-C00020 | Syringe Luer Slip 20ml plastic disposable for HPLC solvent, 10pk |
| P2920-00821-1 | SPE Tube Adapter cho các loại cột chiết có thể tích 1, 3, & 6 mL , pk of 1 |
| P4621-00386 | ChraPart, 20mL Screw-Thread Storage Vial kit – Amber, 100/pk |
| P4819-01461 | Nylon Syringe Filters, 0.22(µm), 13(mm), 100pcs |
| P4819-01467 | Nylon Syringe Filters, 0.45(µm), 25(mm), 100pcs |
| P4819-01477 | PTFE Syringe Filters, 0.22(µm), 13(mm), 100pcs |
| P4819-01479 | PTFE Syringe Filters, 0.45(µm), 13(mm), 100pcs |
| P4819-01485 | PES Syringe Filters, 0.45(µm), 13(mm), 100pcs |
| P4819-01487 | PES Syringe Filters, 0.45(µm), 13(mm), 100pcs |
| P4819-01511 | CA Syringe Filters, 0.45(µm), 13(mm), 100pcs |
| P4819-02765 | 2ml Clear vial, 9-425 screw top, graduated with writing area, 100pcs |
| P4819-02767 | 2ml Clear vial, 9-425 screw top, graduated with writing area, 100pcs |
| P4819-02783 | 2ml Amber vial, 9-425 screw top, graduated with writing area, 100pcs |
| P4819-02793 | Cap and Septa for 2ml Sample Vial, Red PTFE/white silicone septa, for 2ml 9-425 screw top Vial, 100pcs, pcs |
| P4819-02801 | Pre-slit, Blue PTFE/White silicone septa and Black screw cap with hole, for 9-425 screw top Vial, 100pcs, pcs |
| P4819-02803 | Pre-slit, Blue PTFE/White silicone septa and Black screw cap with hole, for 8-425 screw top Vial, 100pcs, pcs |
| P4819-02837 | ChraSep P4819-02837, 20ml Clear vial, 18mm screw top, round bottom, 100pcs |
| P4819-02843 | ChraSep, Blue PTFE/ White silicone septa and silver crimp-top cap with hole, 18mm screw top Vial, 100pcs, pcs |
| P4819-02843-10 | ChraSep, Blue PTFE/ White silicone septa and silver crimp-top cap with hole, 18mm screw top Vial, 10pcs, pcs |
| P4819-02844 | ChraSep P4819-02844, Blue PTFE/ White silicone septa and Silver screw cap with hole, 18mm screw top Vial, 100pcs |
| P4820-07575 | Fingertight One Piece 10-32 PEEK Male Nut/Ferrule for 1/16", OD Tubing, 5/pk |
| P-795 | Đầu nối P-795 - BPR Cartridge 750 psi - IDEX |
| P-838 | LuerTight Fitting System, Natural Polypropylene/ETFE, 1/8" OD Tub |
| PBA600F-24 | COSEL DC24V 600W Power Supply PBA600F-24 DRV-I-1715=7C41/9D37 |
| PSS830909 | Spherisorb Cyano (CN) HPLC Column, Reverse Phase, 80Å, 5 µm, 4.6 mm X 250 mm, 1/pk |
| RDT-1020 | RDT-1020 GC Split Vent Trap With 3 Cartridges, 1/8 In |
| SGE 002000 | Fixed Needle - Plunger Protection Syringes, 10 uL, 50 mm L, 26 G, Bevel Tip; 1/Ea |
| SGT-F0201 | SGT Combi Filter SGT-F0201, 1pk |
| SK-2750T | 2750T COMPRESSOR SERVICE KIT. For use on 2750 2-stage pressure units. MODEL SK-2750T |
| SS-3NBS2-G | Needle Valve, 0.35 Cv, 1/8 in. |
| ST3100 | Starter 3100 pH Bench pH Meter ST3100 |
| SV022A102CSS | Vial 2ml convenience pack, 100pk |
| SV022C102CSS | Vial 2ml convenience pack, 100pk |
| TPK106-5M | Tubing 1/16 OD, .006/.15mm ID, PEEK, 5m/PAK |
| U-132 | Tubing Stainless Steel 1/16 x .010 x .5m |
| U-320 | 316 Stainless Steel Male Nut - SSI Type, 1/16"OD Tubing and has a 10-32 Port |
| U-320X | 316 Stainless Steel Male Nut -Valco Type, 10-32 Coned, for 1/16" OD 10 Pack |
| U-400 | Nut for 1/16" OD Tubing. 10-32 Coned, Stainless Steel Male Nut |
| U-412 | Waters Union, 1/16", SS, Zero Dead Volume |
| UN55-230V | Memmert UN55-230V Universal Oven |
| WAT022996 | Tubing, 1/16 in (1.6mm) O.D. X 0.010 in (0.25 mm) I.D. X 5 ft (1.5 m) Length , PEEK |
| WAT025604 | Compression Screws and Ferrules, 5/pk |
| WAT026-04 | Union PEEK 0.020 1/16" (1.6mm) Genuine OEM Part -Package of 2 |
| WAT026-04-1 | Union PEEK 0.020 1/16" (1.6mm) Genuine OEM Part -Package of 2 |
| WAT097332 | Union, 1/16 in Stainless Steel |
Connector to suction module Buchi (11055367)
Kính bảo vệ chống bắn (Splash protector glass) Buchi (43332)
Phụ tùng thay thế: Cap nut: 003577 Buchi (003577)
Phụ tùng thay thế: Gasket 002073 Buchi ( 002073)
Phụ tùng thay thế: Nut splash protector: 11057038 Buchi ( 11057038)
Phụ tùng thay thế: Seal w. Ring 11057035 Buchi ( 11057035)
Phụ tùng thay thế: Spacer 11057365 Buchi (11057365)
Phụ tùng thay thế: Support back-up ring -11057039 Buchi (11057039)
Phụ tùng thay thế:Đầu nối _ Hypalon Connector 019002 Buchi ( 019002)
PM Kit K-375 Buchi (11062610)
PM Kit K-376/377 Buchi (11062612)
PM Kit K-415 Buchi (11062615)
Set of FKM seals (6 pc’s) Buchi (38122)
Set of springs and holders (6 pc’s) Buchi (11055984)
125-5037Stationary Phases:DB-5, id:0.53, Length:30m, Film Thickness:0.50 µm
122-5032Stationary Phases:DB-5, id:0.25, Length:30m, Film Thickness:0.25 µm
863953-906ZORBAX SB-C8, 3.5 µm, 4.6 mm X 150 mm, 1/pk
Bên em đang có khách hàng cần mua cột GC Agilent sau:
Mã hàng: 122-5532, cột GC DB-5MS, kích thước cột là 30m x 0.25mm x 0.25um
Đèn máy HPLC 1100, G1314-0100
Đèn máy HPLC 1260, 2140-0813
Đèn máy HPLC 1260B, 5190-917
5610122200
1 N/A Hiệu chuẩn, bảo trì máy AAS của Perkin Elmer 900T 1
2 9200253 Perkin Elmer, Viton™ O-Ring for Gas Lines (Neb., Aux., Fuel) of End Cap, 1pk 1
3 9902219 Perkin Elmer, VITON O-RING BURNER HEAD 1
4 B0505086 Perkin Elmer, CERAMIC - BALL 2
Stt Tên sản phẩm Thông số kỹ thuật ĐVT SL
1 Vòng đo mẫu (Sample loop 100µL) lắp đặt máy HPLC 2 Mã: 228-56074-42 Nsx: Shimadzu X/x: Nhật Năm sx: 2022 Cái 1
Stt Tên sản phẩm Thông số kỹ thuật ĐVT SL
1 Bo nguồn kết nối USB-IF (USB-IF Board) Mã: 890-2051 Nsx: Hitachi X/x: Nhật Năm sx: 2022 Cái 1
Đèn D2 G8431-80000 Agilent
GC Column HP-5MS 30m, 0.25mm, 0.25µm 19091S-433 Agilent
ICP-Internal Standard 5188-6525